The hot water heat pump is one of the most economical systems to heat the water for family domestic use or for small business activities. Using free renewable energy from the air, the unit is highly efficient with low running costs. Its efficiency can be up to 3~4 times more than conventional gas boilers or electrical heaters. Calido can be installed in a technical room, in garage or in laundry for example. Efficiency, in addition, increases if the room has a fair amount of heat. During warming up, Calido produces fresh, dehumidified air that can be used for summer cooling \/ dehumidification of a room.<\/p>\n
<\/p>\n
<\/p>\n
REFRIGERANT GAS R134A<\/p>\n
ENERGY CLASS IN HEAT
\nThe energy saving process was considered an essential aspect while studying and projecting of these units. The very low energy consumption levels together with the high efficiency of the compressors, heat exchangers and the use of the ecologic gas, guarantee to the most part of the models an A” energy class mark.<\/p>\n
HOT SANITARY WATER
\nThe installation of a supplementary exchanger working as a condensator in parallel to the air-condensating battery allows a hot sanitary water production independently from the unit working mode.<\/p>\n
INTEGRATION HEAT COIL
\nIntegration heat coil<\/p>\n
MADE IN ITALY
\nItalian development and production<\/p>\n
<\/p>\n
\u2022 Steel tank with double layer vitrification.
\n\u2022 Anti-corrosion magnesium stick for assuring the durability of the tank.
\n\u2022 Condenser wrapped externally to the boiler, free from fouling and gas-water contamination.
\n\u2022 High thickness polyurethane foam (PU) thermal insulation.
\n\u2022 Outer shell made of grey colour plastic material.
\n\u2022 Acoustically isolated top part plastic cover
\n\u2022 Highly efficient compressor with the R134a refrigerant.
\n\u2022 High and low gas pressure protections.
\n\u2022 Electrical heater available in the unit as a back-up (with integrated thermo cut out with protection set at 90\u00b0C), assuring constant hot water even in extreme cold winters.
\n\u2022 ON-OFF contact for starting the unit from an external switch.
\n\u2022 Weekly disinfection cycle.
\n\u2022 Electronic expansion valve for precise control<\/p>\n
<\/p>\n
Advantages<\/strong> <\/p>\n Flexibility and Benefits<\/strong><\/p>\n Waste heat recovery: the unit can be installed near the kitchen, in the boiler-room or the garage, basically in every room which has a large number of waste-heat so that it has the higher energy efficiency even with very low outside temperatures during the winter.
\n\u2022 The actual set of the heat pump is controlled by a climate curve for preventing that the hot air taken from outside (over 25\u00b0C with water at 65\u00b0C, over 35\u00b0C with water at 55\u00b0C) may cause high pressure alarms.
\n\u2022 The electrical heater integrates automatically the temperature of the tank to the desired setting when the actual setting is controlled by the weather curve.<\/p>\n
\nHot water, cooling and dehumidification: the unit can be placed in the laundry room, in clothing room, gym or garage When it produces hot water it lowers the temperature and dehumidifies the room as well.
\nThe function for which the unit has been designed is only that of heat pump for DHW production. Any other side effect (ambient cooling, dehumidification, waste heat recovery) should be considered as a perk. The performance data are therefore provided only with respect to the function of water heating<\/p>\n<\/div>\n